Blodgett MARK V XCEL CONVECTION OVEN Operation, Programming the Shelf ID, Programming Hold Mode

Operation

Blodgett IQ2T Control

Programming the Shelf ID:

The Shelf ID option can be turned on or off for spe- cific product keys.

NOTE: Shelf ID is not allowed with multiple stage recipes.

1.The top display reads SHLF. The bottom dis- play reads the current shelf ID mode. Press the TOGGLE/CLEAR KEY (11) to toggle be- tween yes and no. Press the SCAN KEY (15) to advance the programming mode to timing.

Programming the Timing Mode:

There are 3 options for timing mode: Straight, Flex and Sensitivity.

1.The top display reads tC ---1. The bottom dis- play gives the current timing mode. Press the TOGGLE/CLEAR KEY (11) to toggle between St, FL and SEns.

NOTE: Sensitivity adjusts the cook time to compensate for any difference be- tween the setpoint and actual temper- ature. The lower the sensitivity value the shorter the time adjustment. Sensi- tivity values are set in the manager lev- el programming.

If Shelf ID is activated, all three timing modes are available. If Shelf ID is not activated, only straight or flex timing modes are available.

2.Press the SCAN KEY (15) to advance the pro- gramming mode to hold mode.

Programming Hold Mode:

The hold mode can be toggled on or off for specific product keys.

1.The top display reads HOLD. The bottom dis- play reads the current hold mode. Press TOGGLE/CLEAR KEY (11) to toggle between on and off. Press the SCAN KEY (15).

2.If the hold mode is activated, the bottom dis- play give the current hold time. Press the TOGGLE/CLEAR KEY (11). Use the product keys to enter the new hold time. Press the SCAN KEY (15).

3.The bottom display gives the current hold temperature. Press the TOGGLE/CLEAR KEY (11). Use the product keys to enter the new hold temperature from 140-210_F (60-99_C). Press the SCAN KEY (15).

4.The top display reads HFAN (hold fan speed). The bottom display gives the current hold fan speed setting. Press the TOGGLE/CLEAR KEY (11) to toggle between high and low. Press the SCAN KEY (15) to exit the hold mode programming.

Check all Settings (SEE Mode):

The SEE mode allows the operator to scroll through and view settings of a particular product key.

1.Press the PROG KEY (10). The top display reads Code.

2.Use the product keys to enter the SEE access code: 2 4 4 4. Press the ENTER KEY (14). The top display reads SEE.

3.Press the product key you wish to view. Press the ENTER KEY (14).

4.The control will automatically scroll through the programmable features showing the pro- grammed values for each.

Exiting the programming mode:

1.The top display reads Prod. Press the PROG KEY (10). The control returns to operating mode.

25