Abocom WAP2102 manual Client Mode Settings, Alias Name

Client Mode

Client Mode Settings

Alias Name	Display the name of this device.
Band	You can choose one mode of the following you need.
	~ 2.4GHz (B): 802.11b supported rate only.
	~ 2.4GHz (G): 802.11g supported rate only.
	~ 2.4GHz (B+G): 802.11b supported rate and 802.11g supported
	rate. The default is 2.4GHz (B+G) mode.

SSID

The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID. A SSID is also referred to as a network name because essentially it is a name that identifies a wireless network.

Security

Click Setup button to enter the Wireless Security Setup page.

Authentication: Select an Authentication from the pull-down list including Open system or Shared Key, Open System, Shared Key, WPA-PSK and WPA2-PSK.

Encryption: Select either None or WEP.

Apply Changes: Press to save the new settings on the screen.

Reset: Press to discard the data you have entered since last time you press Apply Changes.

20