Remote Management

URL Filter

Reset: Click to resetore to the default values.

Note: You need to give your LAN PC clients a fixed/static IP address for DMZ to work properly.

Click Setup to enter the Remote Management screen.

Enable Web Server Access via WAN: To permit remote access of the Router, from outside the local network, select to enable. Otherwise, keep the default setting, Disabled.

Port Number: Enter the port number that will be open to outside access.

Save: Click to save the current settings.

Reset: Click to restore to the default values.

Click Setup to enter the URL Filtering screen.

Enable URL Filtering: Click to enable the URL filtering function.

URL Address: You can block websites with specific URL addresses.

Apply Changes: Click to save the current settings.

Reset: Click to clear the current settings.

Current Filter Table: Shows the current URL address status.

Delete Selected: Select the unwanted URL addresses and then click the Delete Selected button to eliminate them.

Delete All: Click to delete all the URL addresses in the table.

Reset: Click to clear the current settings.

17

Page 20
Image 20
Abocom WAP2102 manual Remote Management URL Filter