Abocom WAP2102 manual AP Mode Settings, Alias Name Band, Ssid, Channel Number Mode

AP Mode

AP Mode Settings

Alias Name

Band

SSID

Channel

Number

Mode

Display the name of this device.

You can choose one mode of the following you need.

~2.4GHz (B): 802.11b supported rate only.

~2.4GHz (G): 802.11g supported rate only.

~2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate. The default is 2.4GHz (B+G) mode.

The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID. A SSID is also referred to as a network name because essentially it is a name that identifies a wireless network.

Allow user to set the channel manually or automatically.

If set channel manually, just select the channel you want to specify.

If “Auto” is selected, user can set the channel range to have the Wireless Portable Router automatically survey and choose the channel with best situation for communication.

The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel.

Select the mode form the pull-down list including AP, WDS Bridge and WDS Repeater.

8