of the requested transmission.
If the “Hidden Node” problem is an issue, please specify the packet size. The RTS mechanism will be activated if the data size exceeds the value you set. The default value is 2346.
Warning: Enabling RTS Threshold will cause redundant network overhead that could negatively affect the throughput performance instead of providing a remedy.
The value can be set from 0 to 2346. This value should remain at its default setting of 2346. Should you encounter inconsistent data flow, only minor modifications of this value are recommended.
Beacon Interval: Beacon Interval is the amount of time between beacon transmissions. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point).
Inactivity Time: By default, the unit adaptively selects the highest possible rate for transmission. For most networks the default setting is 30000 that is the best choice. If obstacles or interference are present, the system will automatically fall back to a lower rate.
Preamble Type: A preamble is a signal used in wireless environment to synchronize the transmitting timing including Synchronization and Start frame delimiter. If you want to change the Preamble type into Long or Short, please select the mode you need.
Broadcast SSID:
•Enabled: This wireless AP will broadcast its SSID to stations.
•Disabled: This wireless AP will not broadcast its SSID to stations. If stations want to connect to this wireless AP, this AP’s SSID should be known in advance to make a connection.
WMM: Select Enabled or Disabled to execute WMM function.
Apply Changes: Click to save and apply the current setting.
Reset: Click to clear and reset the current settings.
10
