MAC Filter
IP Filter
Click Setup to enter the MAC Filtering screen.
Enable MAC Filtering: Click to enable the MAC filtering function.
MAC Address: For MAC filtering enters the
Description: You may key in a description for the MAC address.
Save: Click to save the current settings.
Reset: Click to restore to the default values.
Current Filter Table: Shows the current MAC address status.
Delete Selected: Select the unwanted MAC addresses and then click the Delete Selected button to eliminate them.
Delete All: Click to delete all the MAC addresses in the table.
Reset: Click to clear the current settings.
Click Setup to enter the IP Filtering screen.
Enable IP Filtering: Click to enable the IP filtering function.
Local IP Address: For IP filtering enters the
Protocol: Select the protocol (TCP, UDP or Both) used to the remote system or service.
Description: You may key in a description for the IP address.
Save: Click to save the current settings.
18
