SMS (Text messages) Sending SMS Private List
SMS settings
Navigation reminder :
(Go to) (Validate)
(Scroll to) (Select)
SMS stands for Short Message Service. SMS are short text messages sent/received via the network.
To benefit from this service you must subscribe to the Caller Line Identification Service (CLI) together with the SMS service from your network provider.
SMS can be exchanged with a phone (mobile or compatible fixed lines), a fax or an
!Your Onis 300 factory settings correspond to the main national operator. If you wish to send or receive SMS through another operator you must set the corresponding numbers (See page 11).
You have the possibility of opening 3 SMS boxes. One shared & two private for confidentiality for example.
A password can protect your SMS box, but it is not compulsory.
To send SMS to the receiver’s own SMS box, you must know his destination box.
The delivery report may be charged. It is deactivated by default, activate it when you send an SMS.
Sending new SMS
To send an SMS to a phone 1- Go to SMS, validate
2- Select Send new SMS, validate
3- Choose your SMS box & enter the password (if you created several SMS boxes), validate
4- Select Send SMS to a phone, validate
5- Dial the number (you can use the call log or the phonebook), validate 6- Enter the destination box (of the receiver, if prompted to), validate 7- Input the text (see page 8)
8- Scroll to Delivery report to activate it if necessary, validate 9- Select Send Now, validate
Note :The Delivery report option is country dependent.
An SMS can be sent or stored.
The sent SMS can be up to a maximum of 160 characters long
Onis 300 can store up to 50 SMS (depending on the length of the text), for the 3 boxes.
To send an SMS to an
Resume from step
4- Scroll to Send SMS to an
6- Input the text (see page 8)
7- Select Send Now, validate
SMS | 9 |