7 RECORDING
7-9 How to Restore Recording After Power Failure
If a power failure occurs during recording, recording will restart in the same mode as soon as power is restored.
To use this function, set the function menu switch <AUTO REC> to ON.
*If this function menu switch is set to ON and power is turned off and on again in the Stop mode, the VCR enters the Record mode automatically. Be careful.
|
|
|
| VTR MODE 1 |
|
|
|
|
| (SHARPNESS) | NORMAL |
AUTO REC |
|
|
| (AUTO REC) | ON |
|
| ||||
|
|
|
| (REC CHECK) | MANUAL |
|
|
|
| (TAPE END MODE) | REPEAT |
|
|
|
| (INDEX SEARCH) | OFF |
|
|
|
| (CAMERA SW) | OFF |
|
|
|
| (TAPE END BUZZER) | OFF |
|
|
|
| (WARNING BUZZER) | OFF |
PRESS (SHIFT, SET)
PRESS (MENU) TO END
Set to
ON
VTR mode 1 setting screen
7-10 External Timer Recording
External timer recording can be performed by connecting the
1Check that a cassette is loaded in the VCR.
*If the cassette’s safety tab has been removed, recording will not take place.
*This function does not work when the Timer Record mode is engaged.
2Set the function menu switch <AUTO REC> to ON. Power is supplied from the external timer at the specified time and recording starts.
7-11 Tape End Buzzer
When set to ON, a buzzer sounds when the tape ends during recording. To set the buzzer sound on, set the function menu switch <TAPE END BUZZER> to ON.
5Set timing for the buzzer with <REC REMAIN> or <COUNT END>. For details, refer to "Contents of the Function Menu Switches" on page 21.
When the tape reaches the specified position, the following signals are output in addition to the tape end buzzer sound.
•Tape end signal from the rear panel's [TAPE END OUT] terminal
•Series recording signal from the rear panel's [SERIES OUT] terminal during series recording
•“End” indication in the counter display
5To stop the buzzer sound, you can set the <TAPE END BUZZER> function menu switch to OFF, turn off the power, or press another operation button.
5During repeat recording and AUTO REW, the buzzer sounds for about 2 seconds.
|
|
|
| VTR MODE 1 |
|
|
|
|
|
|
| (SHARPNESS) | NORMAL |
|
|
|
|
|
| (AUTO REC) | ON |
|
|
|
|
|
| (REC CHECK) | MANUAL |
|
|
|
|
|
| (TAPE END MODE) | REPEAT |
|
|
|
|
|
| (INDEX SEARCH) | OFF |
|
|
TAPE END |
|
|
| (CAMERA SW) | OFF |
| Set to |
|
|
| (TAPE END BUZZER) | ON |
| ||
|
|
| |||||
BUZZER |
| (WARNING BUZZER) | OFF |
| ON | ||
PRESS (SHIFT, SET)
PRESS (MENU) TO END
VTR mode 1 setting screen
37
