JVC SR-9168U Index Search, Tracking/V. Lock Adjustment, Tracking +/- button Lock +/- button

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

8-4 Index Search

Searching the index code (VISS signal) recorded at the start of alarm recording helps you quickly locate alarm recordings (index search function).

•To use the index search function, set the function menu switch [INDEX SEARCH] to ON.

	VTR MODE 1
	(SHARPNESS)	NORMAL
	(AUTO REC)	OFF
	(REC CHECK)	MANUAL
INDEX	(TAPE END MODE)	STOP	Set to
	(INDEX SEARCH)	ON
SEARCH	(CAMERA SW)	OFF	ON
	(TAPE END BUZZER)	OFF
	(WARNING BUZZER)	OFF

PRESS (SHIFT, SET)

PRESS (MENU) TO END

VTR mode 1 setting screen

5When reverse shuttle search or fast-forward shuttle search is executed, the Index Search mode is engaged. When an index code is located, playback starts automatically.

To engage the Reverse Shuttle Search mode or the Fast-Forward Shuttle Search mode, press the [REW] or [FF] button once during playback.

5When an index code is searched in the Fast-Forward mode or the Rewind mode, the Stop mode is automatically engaged when the code is located.

•The VISS indicator is shown on the display whenever the Index Search mode is engaged.

Index Search does not function in the Auto Rewind mode.

8-5 Tracking/V. Lock Adjustment

When noise appears in the picture in the Play/ Field Advance Play/Search mode

Tracking can only be adjusted in the following modes:

•VHS Standard Play,6H (EP) Play,L18H Play and L30H Play.

•Field Advance Playback with the [PAUSE/STILL] button

•Search mode

■Press the [TRACKING +/-] button to reduce noise.

To restore the tracking preset mode, press the + and - buttons simultaneously.

[TRACKING +/-] button

[V. LOCK +/-] button

When the picture moves up and down in the Still mode

Press the [V. LOCK +/-] button to minimize vertical jitter.

40