Canon 3175B002 user manual Surface of the paper is dirty, Back side of the paper is dirty

Problems with the printing quality

The surface of the paper is dirty

Cause	Corrective Action
The Paper Retainer is soiled.	Clean the Paper Retainer. (→P.644)
You are using a paper that does not dry easily.	Specify a time of about a minute in Roll DryingTime.

The back side of the paper is dirty

Cause	Corrective Action
The Platen has become dirty after borderless printing	Open the Top Cover and clean the Platen.
or printing on small paper.	(→P.641)
The Paper Retainer is soiled.	Clean the Paper Retainer. (→P.644)

Roller marks are left across the trailing edge of paper

Cause	Corrective Action
A document was removed after printing from	Following the instructions, press the Load/Eject
the Front Paper Feed Slot without pressing the	button, remove the paper, and then press the OK
Load/Eject button.	button.
	Wipe away any soiling on the rollers. (→P.641)
	(→P.644)

Immediately After Borderless Printing, the Trailing Edge Margin is Soiled During Regular Printing

Cause	Corrective Action
Depending on your printing environment, after	Follow these steps to set the Between Pages setting
borderless printing in which the leading and trailing	of Drying Time in a range of 30 seconds to 3 minutes
edge of the roll is cut automatically, any ink adhering	before borderless printing.
to the cutter unit may rub off on the next printed	1.On the Main sheet of the printer driver, click
document.	Settings in Media Type.
	2.Select the ink drying time in the Between Pages
	list of Drying Time.

670 Troubleshooting