Canon 3175B002 user manual Conguring the Printer’s NetWare Network Settings

Network Setting

Conguring the Printer’s NetWare Network Settings

Follow the steps below to congure the NetWare network settings.

1. Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI page.

http://“printer IP address or name”/

Example: http://xxx.xxx.xxx.xxx/

2. Select Administrator Mode and click Logon.

3. If a password has been set on the printer, enter the password.

4. Click Network in the Device Manager menu at left to display the Network page.

5. Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings page.

6. Refer to the NetWare Settings Items table to complete the settings.

NetWare Settings Items

	Item		Details	Default Setting
Frame Type		Specify the type of frame to		Disabled
		use in NetWare.
NCP Burst Mode		Activate this setting to use		On
		NCP Burst Mode.
		This mode supports fast data
		transfer when printing in queue
		server mode. Normally, leave
		the setting On.
Print Application		Choose the print service.		NDS PServer
		•	Bindery PServer
		•	RPrinter
		•	NDS PServer
		•	NPrinter
Packet Signature		Select If Requested by Server		If Requested by Server
		to use packet signature.
Bindery	File Server Name	Specify the name of a le		-
PServer		server that has a NetWare print
		server, up to 47 characters.
	Print Server Name	Specify the name of a		-
		NetWare print server, up
		to 47 characters.
	Print Server Password	Set a password for the print		-
		server, up to 20 characters.
	Polling Interval	Specify the interval to conrm		5
		jobs.
		(1-15 seconds)
RPrinter	Print Server Name	Specify the name of a		-
		NetWare print server, up
		to 47 characters.

490 Network Setting