Canon 3175B002 Roll is empty, Roll feed unit err, No Roll Feed Unit, Sheet printing is selected

To print on a roll instead, hold the Stop button for more than a second to cancel printing, load a roll, and then print. (→P.93)

Messages regarding paper

The roll is empty.

Cause	Corrective Action
There is no more paper left on the roll.	Follow the steps below to replace the used roll with a
	new roll of the same type and size.
	1.Remove the roll.
	(→P.124)
	(→P.125)
	(→P.126)
	2.Load the new roll.
	(→P.119)
	(→P.121)
	(→P.122)
	3.If no barcode was printed on the roll, specify the
	paper type.
	(→P.117)
	4.If no barcode was printed on the roll, specify the
	paper length.
	(→P.118)
*If this message is displayed, you can resume the print job.

Roll feed unit err

Cause	Corrective Action
The Roll Feed Unit is not working.	Turn off the printer, remove the Roll Feed Unit
	momentarily, and then reinstall it.
	(→P.146)
	(→P.147)
	If the message is still displayed after you do this,
	contact your Canon dealer for assistance.

No Roll Feed Unit.

Cause	Corrective Action
The printer has received a print job that species	Install the Roll Feed Unit and resend the print job.
rolls, but the Roll Feed Unit is not installed.	(→P.147)

Sheet printing is selected.

Cause Corrective Action

You have attempted to print a test print sheet or other Load a sheet and try printing again. printer status information on a sheet, but no sheet

is loaded.

692 Error Message