Paper size not detected, Insufcient paper for job

Paper size not detected.

Cause	Corrective Action
Paper has been loaded askew, or warped paper has	Reload paper straight, in the correct position.
been loaded.	(→P.122)
	(→P.151)

*If this message is displayed, you can resume the print job.

Cause	Corrective Action
The printer has received a print job longer than the	Follow the steps below to replace the roll.
amount of roll paper left.	1.Remove the roll.
	(→P.124)
	(→P.125)
	(→P.126)
	2.Load a roll with enough paper left.
	(→P.119)
	(→P.121)
	(→P.122)
	3.If no barcode was printed on the roll, specify the
	paper type.
	(→P.117)
	4.Select the paper length, unless a barcode was
	printed on the roll and you have deactivated
	automatic detection of the remaining roll paper.
	(→P.118)

	Hold down the Stop button for a second or more to
	cancel printing.

	Press the Online button to resume printing.
	However, the roll paper may run out during the
	print job and you may not be able to print all of the
	document.

690 Error Message