Canon 3175B002 user manual Click OK to display the Network

Network Setting

Item	Details	Default Setting
RAW Printing	Activate this setting to use Raw	On
	Printing.
SMTP Server Address	Specify the SMTP server’s IP	0.0.0.0
	address.
Primary DNS Server Address	Specify the IP address of the	0.0.0.0
	primary DNS server.
SecondaryDNSServerAddress	Specify the IP address of the	0.0.0.0
	secondary DNS server.
DNS Host Name	Specify the printer host name,	NB-17FBxxxxxxxxxxxx
	up to 63 characters (1-63
	characters). Use single-byte
	letters, numbers, and “-”
	(hyphens). Do not use numbers
	or “-” for the rst character or “-”
	for the last character.
DNS Domain Name	Specify the printer domain	(Blank)
	name, up to 63 characters. Use
	single-byte letters, numbers, “-”
	(hyphens), and “”. (periods). Do
	not use numbers, “-”, or “”. for the
	rst character, or “-” or “”. for the
	last character.
Multicast DNS Service Name	Specify the printer’s Multicast	Canon iPFxxxx (xxxxxx)
	DNS service name, up to 63
	characters. (1-63 characters)
	This name will be displayed when
	Bonjour functions are used.

7. Click OK to display the Network page.

Note

•If you specify to congure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports such protocol running in the network.

•If you specify to congure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method is used rst. If you cannot obtain the IP address, the address specied in IP Address is used.

•It takes a minute or two to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing check boxes of options you will not use.

•If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address, DNS Host Name, and DNS Domain Name, respectively.

488 Network Setting