Canon 3175B002 user manual Specifying the Cutting Method for Rolls

Handling rolls

Specifying the Cutting Method for Rolls

How a roll is cut after ejection varies depending on the printer settings.

	Cutting Method	Menu Settings		Driver Setting
Automatic	The roll is automatically cut by the Cutter	Cutting	Automatic	Auto Cut	Yes
	Unit following printer driver settings.	Mode
Eject	Choose this setting if you prefer not to		Eject		Yes
(→P.136)	have documents dropped immediately after
	printing, as when waiting for ink to dry.
	To cut the roll using the Cutter Unit, hold
	down the Stop button for a second or more.
Manual	Choose this setting when using media that		Manual		NoYesPrint
(→P.137)	cannot be cut using the Cutter Unit.				Cut
	Cut each page from the roll using scissors.				Guideline
	For continuous printing (if you will cut each
	page later), in Auto Cut, select Yes, or
	select Print Cut Guideline.
	(→P.367)
Paper	Choose this option if you want to cut pages	Paper	Yes		NoPrint
Cutting	by pressing Cutter Unit buttons for manual	Cutting			Cut
(→P.139)	cutting after printing when the printer driver				Guideline
	is congured to Auto Cut > No or Print Cut
	Guideline.
	Otherwise choose this option if you want to
	cut the roll edge after loading a roll.

Note

•Automatic and Eject are valid only when you have specied Auto Cut > Yes in the printer driver.

•With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.

Cut rolls manually in the following cases:

Handling Paper 135