Other Messages

Other Messages

GARO Wxxxx (x represents a number)

Cause Corrective Action
T ry printing again, using the correct printer driver .There is a problem with the print job.
It is also possible to continue printing in this state.
However , you may not be able to obtain the desired
printing results.

ERROR Exxx-xxxx (x represents a letter or number)

Cause Corrective Action
An error requiring service may have occurred. W rite down the error code and message, turn of f the
printer , and contact your Canon dealer for assistance.

Hardware error . xxxxxxxx-xxxx (x represents a letter or

number)

Cause Corrective Action
The last portion of roll paper was used during a
print job. The paper was not advanced because the
trailing edge is taped to the roll.
T urn of f the printer and remove the roll from the
printer before restoring power .
Fastening tape or the Belt Stopper has not been
removed inside the T op Cover .
T urn of f the printer , open the T op Cover and remove
the tape or the Belt Stopper before restoring power .
An error requiring service may have occurred. T urn of f the printer and wait at least three seconds
before restoring the power .
If the message is displayed again, write down the
error code and message, turn of f the printer , and
contact your Canon dealer for assistance.

Prepare for parts replacement.

Cause Corrective Action
It is almost time to replace consumables for which
service is required.
If Parts replacement time has passed. is displayed,
you can continue to use the printer for some time.
Contact your Canon dealer for assistance.
706 Error Message