Canon 3175B002 user manual Handling rolls, Selecting the Paper Source, Or the Cut Sheet lamp b

Handling rolls

Handling rolls

Selecting the Paper Source

When selecting Paper Feed Slot, press the Feeder Selection button.

You can determine which Paper Feed Slot is selected by checking which lamp is lit, the Roll Media lamp

(a)or the Cut Sheet lamp (b).

•Roll Media lamp : Selected when printing on Roll Media.

•Cut Sheet lamp : Selected when printing on Sheets from the Top Paper Feed Slot or Front Paper Feed Slot.

Note

•If any paper is loaded that will not be used, a message is shown on the Display Screen, either Remove roll? or Eject sheet? when you press the Feeder Selection button.

When removing the paper, press the OK button. (→P.145)

•You cannot switch the paper source in the following situations:

•If the Message lamp is ashing

Check the message on the Display Screen and take action as necessary. (→P.684)

•If the Data lamp is ashing

Select the paper source after printing.

•If a printer menu operation is in progress

Select the paper source after the menu operation.

•When in the process of loading paper

Finish loading the paper before selecting the paper source.

•When in the process of replacing Ink Tanks

Finish replacing the Ink Tanks before selecting the paper source.

•If the Top Cover is open

Close the Top Cover before selecting the paper source.

116 Handling Paper