Canon 3175B002 Cannot adjust printhead, Cannot calibrate, Excessive temperature or humidity

Messages regarding printing or adjusment

Cannot adjust printhead.

Cause	Corrective Action
The Printhead nozzles are clogged.	Follow the steps below to check the nozzles.
	1.Print a test pattern to check the nozzles.
	(→P.624)
	2.Clean the Printhead if the nozzles are clogged.
	(→P.625)
Highly transparent lm is loaded that cannot be used	We recommend using a type of paper that you often
for Printhead adjustment.	use, other than lm, for Printhead adjustment.
	(→P.572)

Cannot calibrate.

Cause	Corrective Action
The paper for printing a test pattern for adjustment is	Load unused paper compatible with color calibration.
soiled. Otherwise, colored paper is loaded.	(→P.108)
The printed test pattern is faint.	Take steps to remedy the faint printing.
	(→P.667)
Direct sunlight or strong lighting may be shining on	Take steps to ensure the printer is not used when
the printer and causing the sensor to malfunction.	exposed to direct sunlight or strong lighting.

Excessive temperature or humidity.

Cause	Corrective Action
The temperature or humidity where the printer is	Press the Stop button and stop printing.
installed is out of the acceptable range for printer	Use the printer in an environment that meets the
operation.	requirements for the operating environment. Note
	that various environmental conditions are also
	recommended for various types of paper. For details
	on the recommended environmental conditions for
	paper, see "Paper Reference Guide."
	(→P.108)
	Press the OK button and complete color calibration.
	However, calibration may not be completed
	successfully.

700 Error Message