Printing banners or at other non-standard sizes

Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)

This topic describes how to print a banner about ve times as long as the roll width based on the following example.

Document: An original designed for a horizontal banner

Page Size: Non-standard (100×500 mm [3.9×19.7 in])

Paper: Roll

Paper type: Plain Paper

Roll paper width: 16 inches (406.4 mm)

Follow the steps below to print a banner in either horizontal or vertical format.

1.In the application, create an original in the format of a horizontal or vertical banner.

2.Register a “Custom Page Size”.

Banners tend to be in non-standard sizes, so register a “Custom Page Size” in Page Setup. In this example, 100×500 mm (3.9×19.7 in) is registered.

3.Print the banner, using the settings that correspond to banners.

Note

The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper sizes varies depending on the version of Mac OS X.

296 Enhanced Printing Options

Page 310
Image 310
Canon 3175B002 user manual Printing banners or at other non-standard sizes