Canon 3175B002 Messages regarding printing or adjusment, Use another paper, Cannot adjust band

Messages regarding printing or adjusment

Messages regarding printing or adjusment

Use another paper.

Cause	Corrective Action
The Printhead and feed amount cannot be adjusted	For automatic Printhead adjustment, we recommend
when highly transparent lm is loaded.	using a type of paper that you often use, other than
	lm.
	(→P.572)
	Adjust the feed amount manually.
	(→P.580)

Cannot execute this command. Use other paper.

Cause	Corrective Action
Theloadedpapercannotbeusedforcolorcalibration.	Load paper compatible with color calibration. (*1)
	See "Paper Reference Guide."
	(→P.108)

*1: Always make sure the loaded paper matches the media type setting on the printer. Adjustment cannot be completed correctly unless the setting value matches the loaded paper.

Cannot print as specied.

Press Load/Eject and replace paper with A4/LTR (vertical) or larger

Cause	Corrective Action
Paper has been loaded that is too small to	Press the Load/Eject button and switch to paper A4/Letter,
print the test pattern for printhead adjustment	vertical, or larger.
or nozzle checking.

Press Load/Eject and replace roll with 10 in. wide or larger roll.

Cause	Corrective Action
Paper has been loaded that is too small to	Press the Load/Eject button and load a roll at least 10
print the test pattern for printhead adjustment	inches (254 mm) wide.
or nozzle checking.

Cannot adjust band.

Cause	Corrective Action
The Printhead nozzles are clogged.	Follow the steps below to check the nozzles.
	1.Print a test pattern to check the nozzles.
	(→P.624)
	2.Clean the Printhead if the nozzles are clogged.
	(→P.625)
Highly transparent lm is loaded that cannot be used	Adjust the feed amount manually.
for feed amount adjustment.	(→P.580)

Error Message 699