Canon 3175B002 user manual Borderless printng not possible, Check roll width and spacers

Messages regarding paper

Borderless printng not possible.

Check roll width and spacers.

Cause	Corrective Action
The paper is loaded askew.	Insert the paper and Spacer for Borderless Printing
	rmly all the way into the printer.
	When using A1 or A2 rolls, attach the Spacer for
	Borderless Printing before loading the roll.
	(→P.143)
	When using sizes other than A1 or A2, remove the
	Spacer for Borderless Printing before loading the roll.
	(→P.143)
The paper loaded is not compatible with borderless	Load paper compatible with borderless printing and
printing.	try printing again. Paper you can use for borderless
	printing is restricted to particular types of paper and
	rolls of particular widths. For information on types of
	paper compatible with borderless printing, refer to the
	Paper Reference Guide. (→P.108)
Because paper expands or contracts depending on	Use each type of paper only where the recommended
the environment of use, it may become narrower or	environmental conditions are met. For details on
wider than the supported width for borderless printing.	environmental conditions for various paper, see the
	Paper Reference Guide. (→P.108)

Check supported paper.

Cause	Corrective Action
The print job received species a type or width of	Follow these steps to change the settings of the print
paper that is not compatible with borderless printing.	job to enable borderless printing.
	1.Hold down the Stop button for a second or more
	to cancel printing.
	2.Make sure the correct printer driver for the printer
	is selected and try printing again.
	For information on types of paper compatible with
	borderless printing, refer to the Paper Reference
	Guide. (→P.108)
	If you press the Online button and continue printing,
	the document will be printed with a border.

696 Error Message