Control Panel

Setting Item

Description, Instructions

(The paper type is

Cutting Mode

Specify whether or not to cut with the standard round-bladed

displayed here.)(*1)

 

cutter.

 

 

Choose Automatic to have the roll cut automatically after

 

 

printing. If you choose Eject, the paper is cut after you hold

 

 

down the Stop button for a second or more. If you choose

 

 

Manual, the paper will not be cut after printing. Instead, a line

 

 

will be printed at the cut position.

 

 

 

 

Bordless Margin

Adjust the margin during borderless printing.

 

 

Choose Automatic to have the printer automatically detect the

 

 

paper width and congure the margin settings for borderless

 

 

printing. If margins are mistakenly created when Automatic is

 

 

selected, choose Fixed. In this case, the paper width is not

 

 

detected automatically, and the document is printed without

 

 

borders, using the margin settings required by the printer.

 

 

 

 

CutDustReduct.

Choose On to reduce the amount of debris generated when

 

 

cutting lm and similar media by printing a line at the cut

 

 

position. This option reduces the amount of debris given off after

 

 

cutting. It also helps prevent adhesive from sticking to the cutter

 

 

and keeps the cutter sharp if you use adhesive paper. (→P.141)

 

 

 

 

NearEnd Sht Mrgn

Specify a margin at the leading edge of sheets to ensure better

 

 

printing quality at the leading edge.

 

 

Note that if you choose 3mm, it may lower the printing quality

 

 

at the leading edge and affect feeding accuracy. The printed

 

 

surface may be scratched, and ink may adhere to the leading

 

 

edge.

 

 

 

 

Manual Feed

When printing manually, choose the Paper Feed Slot. Normally,

 

 

choose Top. For heavyweight paper such as POP Board,

 

 

choose Front.

 

 

 

 

Return Defaults

Choose Yes to restore Paper Details to the factory default

 

 

values.

 

 

 

*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.108) The paper type setting in the printer driver and related software (as well as on the Control Panel) is updated when you install the printer driver from the User Software CD-ROM or if you change paper information by using the Media Conguration Tool.

62 Printer Parts

Page 76
Image 76
Canon 3175B002 user manual Specify whether or not to cut with the standard round-bladed