Exmark Lazer Z manual Maintenance And Storage, Riding Attachments, Safety Signs

Models: Lazer Z

1 44
Download 44 pages 4.59 Kb
Page 9
Image 9

1.5MAINTENANCE AND STORAGE

1.5.1For engine maintenance, follow the engine manufacturer's recommendations precisely as stated in the engine manual.

1.5.2If carburetor adjustment is necessary, stand to one

side and keep feet and hands clear while making adjustments.

1.5.3Keep engine and engine area free from accumulation of grass, leaves, excessive grease or oil and other debris which can accumulate in these areas. These materials can become combustible and may result in a fire.

1.5.4Store fuel in a container specifically designed for this purpose. Store the fuel container in a cool, dry place.

1.5.5Keep the mower and fuel container in locked storage to prevent children from playing or tampering with them.

1.5.6Gasoline powered equipment or fuel containers should not be stored in a basement or any enclosed area where open pilot lights or heat appliances are present.

1.5.7Maximum mowing results and safety can only be achieved if the mower is properly maintained and operated correctly.

1.5.8.Check all bolts often to maintain proper tightness.

1.5.9.Keep all guards, shields and all safety devices in place and in safe working condition.

1.5.10Frequently check for worn or damaged components that could create a hazard.

1.5.11All replacement parts must be the same as or equivalent to the parts supplied as original equipment.

1.6RIDING ATTACHMENTS

Use only Exmark riding attachments. The use of other than Exmark riding attachments may create a hazardous condition resulting in injury.

1.7SAFETY SIGNS

1.7.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs.

1.7.2Safety signs must be replaced if they are missing or illegible.

1.7.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.7.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

1.7.5Safety signs can be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.7.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

- 4 -

Page 9
Image 9
Exmark Lazer Z manual Maintenance And Storage, Riding Attachments, Safety Signs