2.9.6Cutting Height: Adjusts in 1/4" (.63 cm) or smaller increments by various adjustments of caster spacers, blade spacers and axle height, from 1” to 4 1/4” (2.5 cm - 10.8 cm).
2.10DIMENSIONS
2.10.1Overall Width:
| 32" | 36" | 48"♦ | 48”◊ | ||||
Discharge chute | 42.45 | in. | 46.1 | in. | 58.1 | in. | 58.2 | in. |
down | 107.8 cm | 117.1 cm | 147.6 | cm | 148.0 | cm | ||
|
|
|
|
|
|
|
|
|
Up | 32.75 | in. | 36.4 | in. | 48.4 | in. | 48.1 | in. |
(transport only) | 83.2 | cm | 92.5 | cm. | 122.9 | cm | 122.2 | cm |
|
|
|
|
| ||||
| 32" | 36" | 48"♦ | 48”◊ | ||||
Overall Length | 78 in. | 78 in. | 74.7 | in. | 73.0 | in. | ||
| 198.1 cm | 198.1 cm | 189.7 | cm | 185.4 | cm | ||
|
|
|
|
|
|
|
| |
Overall Height | 40.0 in. | 40.0 | in. | 40.0 | in. | 40.0 | in. | |
| 101.6 cm | 101.6 cm. | 101.6 | cm | 101.6 | cm | ||
|
|
|
|
|
|
|
|
|
Tread Width∗ | 32.05 | in. | 35.6 | in. | 35.6 | in. | 35.6 | in. |
| 81.4 | cm | 90.4 cm | 90.4 cm | 90.4 cm | |||
|
|
|
|
| ||||
Curb Weight∗∗ | 374 lbs | 391 lbs | 431 lbs | 439 lbs | ||||
| 170 kg | 177 | kg | 196 | kg | 199 | kg | |
|
|
|
|
|
|
|
|
|
∗To outside of tires.
∗∗Weights will vary slightly depending on engine option.
♦For Serial No.s 150,000 through 159,999.
◊For Serial No.s 160,000 and higher.
2.11TORQUE REQUIREMENTS
BOLT LOCATION | TORQUE |
|
Blade/Cutter Housing Spindle Bolt | ||
Caster Bracket Mounts | ||
Cutter Deck/Engine Deck Mount | ||
Engine Mounting Bolts |
|
|
Briggs & Stratton | ||
Kohler & Kawasaki | ||
Transmission Shifter Lever |
3.ASSEMBLY INSTRUCTIONS
3.1Uncrate unit, leaving it on the pallet, place upper handle assembly, fuel tank, and shifter lever at the rear of the machine. Place casters at the front of the unit.
3.2Place a length of 4" x 4" block between the front of the cutter deck and the pallet.
3.3Remove the bolt bag from the top of the fuel tank support.
3.4Refer to Parts Manual to help you identify and locate parts and their proper position.
- 8 -
