Vivotek 65HP, IP8155 user manual Image settings

VIVOTEK

Image settings

On this page, you can tune the White balance, Image adjustment and WDR enhanced .

Sensor Setting 1:

For normal situations

Sensor Setting 2:

For special situations

White balance: Adjust the value for the best color temperature.

■ You may follow the steps below to adjust the white balance to the best color temperature.

1.Place a sheet of paper of white or cooler-color temperature color, such as blue, in front of the lens, then allow the Network Camera to automatically adjust the color temperature.

2.Click the On button to Fix current value and confirm the setting while the white balance is being measured.

■ You may also manually tune the color temperature by pulling the RGain and BGain slide bars.

Image Adjustment

■Brightness: Adjust the image brightness level, which ranges from -5 to +5.

■Contrast: Adjust the image contrast level, which ranges from -5 to +5.

■Saturation: Adjust the image saturation level, which ranges from 0% to 100%.

■Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.

■Gamma curve: Adjust the image sharpness level, which ranges from 0% to 100%.

You may let firmware Optimize your display or select the Manual mode, and pull the slide bar pointer to change the preferred level of Gamma correction towards higher contrast or towards the higher luminance for detailed expression for both dark and lighted areas of an image.

Noise reduction

■Enable noise reduction: Check to enable noise reduction in order to reduce noises and flickers in image. This applies to the onboard 3D Noise Reduction feature. Use the pull-down menu to adjust the reduction strength. Note that applying this function to the video channel will consume system computing power.

User's Manual - 49