VIVOTEK
Custom Command
If Custom Camera (scanner) is selected as the PTZ driver, you will need to configure command buttons to control the PTZ scanner. Click Custom Command to open the Custom Command page to set the commands in the Control Settings session. Please refer to your PTZ scanner's
documentation to enter the commands in the following fields. Click Save to enable the settings and
click Close to exit the page.
NOTE:
►If you select DynaDome/SmartDOME, Lilin
►For all PTZ drivers, a total of five additional command buttons can be configured.
►The command buttons will be displayed on the main page:
User's Manual - 101
