Siemens S323, S223 user manual Lldp Message, Interval and Delay Time, 124 A50010-Y3-C150-2-7619

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

In hiD 6615 S223/S323, the administrator can enable and disable basic TLV by selecting it. To enable basic TLV by selecting it, use the following command.

Command	Mode	Description
lldp enable PORTS {portdescrip-		Selects basic TLV that is sent in the port.
tion sysname sysdescription		portdescription: Port’s description
syscap}		syscap: System’s capablility
	Bridge	sysname: System’s name
		sysdescription: System’s description
lldp disable PORTS {portde-
scription sysname sysde-		Disables basic TLV configured as sent in the port.
scription syscap}

7.3.4LLDP Message

In hiD 6615 S223/S323, it is possible to configure the interval time and times of sending LLDP message. To configure the interval time and times of LLDP message, use the fol- lowing command.

Command	Mode	Description
lldp msg txinterval <5-32768>		Configures the interval of sending LLDP message. The
	Bridge	unit is second.
lldp msg txhold <2-10>		Configures the periodic times of LLDP message.

i

Default for sending LLDP message is 4 times in every 30 seconds.

7.3.5Interval and Delay Time

In hiD 6615 S223/S323, the administrator can configure the interval time of enabling LLDP frame after configuring LLDP operation type. To configure the interval time of ena- bling LLDP frame after configuring LLDP operation type, use the following command.

Command	Mode	Description
		Configures the interval time of enabling LLDP frame
lldp reinitdelay <1-10>	Bridge	from the time of configuring not to process LLDP
		frame. (default: 2)

To configure delay time of transmitting LLDP frame, use the following command.

Command	Mode	Description
lldp txdelay <1-8192>	Bridge	Configures delay time of transmitting LLDP frame.
		(default: 2)

124 A50010-Y3-C150-2-7619