Siemens S323 334 A50010-Y3-C150-2-7619, Command Mode Description Router ospf, No router ospf

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

i

!

Step1

Open Router Configuration mode from Global Configuration mode.

Command	Mode	Description
router ospf [<1-65535>]	Global	Opens Router Configuration mode with enabling OSPF.
no router ospf [<1-65535>]		Disables OSPF routing protocol.

In case that more than 2 OSPF processes are operated, a process number should be as- signed. Normally, there is one OSPF which is operating in one router.

If OSPF routing protocol is disabled, all related configuration will be lost.

Step2

Configure a network ID of OSPF. Network ID decides IP v4 address of this network.

Command	Mode	Description
router-id A.B.C.D	Router	Assigns a router ID with enabling OSPF.
no router-id A.B.C.D		Deletes a configured router ID.

In case if using router-idcommand to apply new router ID on OSPF process, OSPF process must be restarted to apply. Use the clear ip ospf process command to restart OSPF process.

If there is changing router ID while OSPF process is operating, configuration must be processed from the first. In this case, the hiD 6615 S323 can change only router ID with- out changing related configurations.

Command	Mode	Description
ospf router-id A.B.C.D		Changes only a router ID without changing related
	Router	configurations.
no ospf router-id A.B.C.D		Deletes a changed router ID.

To transfer above configuration to other routers, Use the clear ip ospf process com- mand to restart OSPF process.

To display configured router-id, use the following command.

Command	Mode	Description
	Enable
show router-id	Global	Displays configured router ID
	Bridge

334 A50010-Y3-C150-2-7619