Siemens S323, S223 user manual Transmitting Icmp Redirect Message, 172 A50010-Y3-C150-2-7619

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To configure the limited ICMP transmission time, use the following command.

Command	Mode	Description
ip icmp interval rate-limit IN-	Global	Configures a limited ICMP transmission time.
TERVAL		INTERVAL: 0-2000000000 (unit: 10 ms)

i

The default ICMP interval is 1 second (100 ms).

To return to default ICMP configuration, use the following command.

Command	Mode	Description
ip icmp interval default	Global	Returns to default configuration.

To display ICMP interval configuration, use the following command.

Command	Mode	Description
show ip icmp interval	Enable	Shows ICMP interval configuration.
	Global

7.14.3Transmitting ICMP Redirect Message

User can configure to transmit ICMP Redirect Message. Transmitting ICMP Redirect Message is one of the ways preventing DoS(Denial of Service), and this can make the switch provide the constant service to the hosts.SURPASS hiD 6615 transmits more op- timized route to the host than the present route between the host connected to the switch and the specific destination.

To activate the function transmitting ICMP Redirect Message, use the following command.

Command	Mode	Description
ip redirects		Activates the function transmitting ICMP Redirect
		Message
	Global
no ip redirecs		Deactivates the function transmitting ICMP Redi-
		rect Message.

172 A50010-Y3-C150-2-7619