Siemens S223, S323 user manual Radius Server for System Authentication, Radius Server Priority

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

4.2.4RADIUS Server

4.2.4.1RADIUS Server for System Authentication

To add/delete the RADIUS server for system authentication, use the following command.

Command	Mode	Description
login radius server A.B.C.D		Adds the RADIUS server with its information.
		A.B.C.D: RADIUS server address
KEY
		KEY: authentication key value
		Adds the RADIUS server with its information.
login radius server A.B.C.D	Global	A.B.C.D: RADIUS server address
KEY auth_port PORT acct_port		KEY: authentication key value
PORT		auth_port: Enters authentication port number(optional)
		acct_port: Enters accounting port number(optional)
no login radius server A.B.C.D		Deletes an added RADIUS server.

i

You can add up to 5 RADIUS servers.

4.2.4.2RADIUS Server Priority

To specify the priority of a registered RADIUS server, use the following command.

Command		Mode	Description
login radius server	move		Specifies the priority of RADIUS server.
		Global	A.B.C.D: IP address
A.B.C.D <1-5>
			1-5: priority of RADIUS server

4.2.4.3Timeout of Authentication Request

After the authentication request, the hiD 6615 S223/S323 waits for the response from the RADIUS server for specified time.

To specify a timeout value, use the following command.

Command	Mode	Description
login radius timeout <1-100>	Global	Specifies a timeout value.
		1-100: waiting-time for the response (default: 3)

A50010-Y3-C150-2-7619 51