Siemens S223 Additional TACACS+ Configuration, TCP Port for the Authentication, Priority Level

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To specify a timeout value, use the following command.

Command	Mode	Description
login tacacs timeout <1-100>	Global	Specifies a timeout value.
		1-100: waiting-time for the response (default: 3)

4.2.5.4Additional TACACS+ Configuration

The hiD 6615 S223/S323 provides several additional options to configure the system au- thentication via TACACS server.

TCP Port for the Authentication

To specify TCP port for the system authentication, use the following command.

Command	Mode	Description
login tacacs socket-port		Specifies TCP port for the authentication.
<1-65535>	Global	1-65535: TCP port
no login tacacs socket-port		Deleted the configured TCP port for the authentication

Authentication Type

To select the authentication type for TACACS+, use the following command.

Command	Mode	Description
		Selects the authentication type for TACACS+.
login tacacs auth-type {ascii		ascii: plain text
pap chap}	Global	pap: password authentication protocol
		chap: challenge handshake authentication protocol
no login tacacs auth-type		Deletes a specified authentication type.

i

Priority Level

You can define a priority level of user. According to the defined priority level, the user has different authorization to access the DSLAM. This priority must define in the TACACS server in the same way.

To define the priority level of user, use the following command.

Command	Mode	Description
login tacacs priority-level {min		Defines the priority level of user, refer the below infor-
user max root}	Global	mation for the order of priority.
no login tacacs priority-level		Deletes a defined priority level.

The order of priority is root = max > user > min.

A50010-Y3-C150-2-7619 53