Siemens S223, S323 user manual Restarting RIP, UDP Buffer Size of RIP

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To configure RIP authentication, use the following command.

	Command	Mode	Description
ip rip	authentication key-chain		Enables authentication for RIP v2 packets and to spec-
			ify the set of keys that can be used on an interface.
NAME
			NAME: name of key chain
			Specifies the authentication mode.
		Interface	text: sends a simple text password to neighbors. If a
			neighbor does not have the same password, request
ip rip authentication mode {text
			and updates from this system are rejected.
md5}
			md5: sends an MD5 hash to neighbors. Neighbors
			must share the MD5 key to decrypt the message and
			encrypt the response.
	Command	Mode	Description
			Configures RIP authentication string which will be us-
ip rip	authentication string	Interface	ing on interface without Key chain. The string must be
STRING			shorter than 16 characters.
			STRING: RIP authentication string

To disable RIP authentication, use the following command.

Command	Mode	Description
no ip rip authentication key-		Disables authentication keys that can be used on an
chain NAME		interface.
no ip rip authentication mode	Interface	Disables specified authentication mode.
{text md5}
no ip rip authentication string		Removes RIP authentication string which will be using
STRING		on interface without Key chain.

10.3.14Restarting RIP

Occasionally, you should restart RIP system only when the switch is still operating while you manage and configure RIP. At this time, the switch reports the neighbors that RIP system is being restarting. It keeps previous route information until the restarting is com- plete in timer.

To restart RIP system only, use the following command.

Command Mode Description

rip restart grace-period

<1-65535>

Restarts RIP system and set the period.

Global

no rip restart grace-period

[<1-65535>]

Removes a configured period.

10.3.15UDP Buffer Size of RIP

RIP protocol exchanges the routing information between routers using UDP packets. The hiD 6615 S323 can be configured theses UDP packets buffer size, use the following

A50010-Y3-C150-2-7619 371