Siemens S223 To configure a dead interval, use the following command, A50010-Y3-C150-2-7619 339

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

i

Transmit delay is considering of the configuration for LSA transmission time.

The interval explained as above must be consistent across all routers in an attached net- work.

To configure a Hello interval, use the following command.

Command	Mode	Description
ip ospf hello-interval <1-65535>		Configures a Hello interval in the unit of second.
ip ospf A.B.C.D hello-interval <1-
		1-65535: interval value (default: 10)
65535>	Interface
no ip ospf hello-interval		Sets a Hello interval to the default value.
no ip ospf A.B.C.D hello-interval

To configure a retransmit interval, use the following command.

Command	Mode	Description
ip ospf retransmit-interval <1-
65535>		Configures a retransmit interval in the unit of second.
		1-65535: interval value (default: 5)
ip ospf A.B.C.D retransmit-
interval <1-65535>	Interface
no ip ospf retransmit-interval
		Sets a retransmit interval to the default value.
no ip ospf A.B.C.D retransmit-
interval

To configure a dead interval, use the following command.

Command	Mode	Description
ip ospf dead-interval <1-65535>		Configures a dead interval in the unit of second.
ip ospf A.B.C.D dead-interval <1-
		1-65535: interval value (default: 40)
65535>	Interface
no ip ospf dead-interval		Sets a dead interval to the default value.
no ip ospf A.B.C.D dead-interval

To configure a transmit delay, use the following command.

Command	Mode	Description
ip ospf transmit-delay <1-65535>		Configures a transmit delay in the unit of second.
ip ospf A.B.C.D transmit-delay
		1-65535: interval value (default: 1)
<1-65535>
	Interface
no ip ospf transmit-delay
		Sets a transmit delay to the default value.
no ip ospf A.B.C.D transmit-
delay

A50010-Y3-C150-2-7619 339