Siemens S323, S223 Clearing Mrib Information, Clearing Total or Partial Group Entry of Mrib

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

9.1.3Clearing MRIB Information

Clearing Total or Partial Group Entry of MRIB

If you use the clear ip mroute command, the MRIB clears the multicast route entries in its multicast route table, and removes the entries from the multicast forwarder. Each mul- ticast protocol has its own clear multicast route command. The protocol-specific clear command clears multicast routes from the protocol, and also clears the routes from the MRIB.

To delete the multicast route entries, use the following command.

Command	Mode	Description
clear ip mroute *	Enable	Deletes all multicast routes entries.
		Deletes specific multicast routes entries.
clear ip mroute GROUP-ADDR	Global
		GROUP-ADDR: group IP address
[SRC-IP-ADDRESS]	Bridge
		SRC-IP-ADDRESS: source IP address

Clearing Statistics of Multicast Routing Table

To delete the multicast route statistics entries from IP multicast routing table, use the fol- lowing command.

Command	Mode		Description
clear ip mroute statistics *		Deletes all	multicast routes statistics
		entries.
	Enable
		Deletes specific multicast routes statis-
	Global
clear ip mroute statistics GROUP-ADDR[SRC-		tics entries.
	Bridge
IP-ADDRESS]		GROUP-ADDR: group IP address
		SRC-IP-ADDRESS: source IP address

Clearing MFC and Tree Information Base which are produced by PIM-SM

To clear all Multicast Forwarding Cache (MFC) and TIB entries in the PIM-SM protocol level, use the following command.

Command		Mode	Description
clear ip mroute * pim	sparse-		Deletes all MFC and TIB entries in the PIM-SM.
mode
		Enable
clear ip mroute GROUP-ADDR			Deletes specific MFC and TIB entries in the PIM-SM.
		Global
[SRC-IP-ADDRESS]pim sparse-			GROUP-ADDR: group IP address
mode			SRC-IP-ADDRESS: source IP address

280 A50010-Y3-C150-2-7619