Daewoo DHR-8100P System, Enter the necessary information for your Timer Recordings, Edit Timer

Enter-ConfirmSetup-Exit Move É

Instructions:

The ‘VideoPlus’ menu appears.

Enter the entire ‘VideoPlus’ number. This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazine.

e.g.: 5-234-89 or 5 234 89

Enter 523489 for the ‘VideoPlus’ number.

If you make a mistake, you can clear it with [CLEAR].

Press [ENTER] to confirm.

3 Select ‘VideoPlus’ with [É/ ] and confirm with [ENTER].

1 Insert recordable media such as DVD±R, DVD±RW if you are recording to DVD.

2 Press [TIMER].

The ‘Select Record Method’ menu appears.

Select Record Method

Please choose your preferred

method for scheduling Manual edit timerVideoPlus

VideoPlus

Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed by the HDD/DVD Recorder for programming is contained in the VideoPlus programming number. This VideoPlus number is found in most TV listings.

Please enter your VideoPlus Code.

– – – – – – – – –

1200DPI 100LPI

Timer Recording

finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded.

DG-M22-12D1P-XA(GB) 2005.12.22 8:4 AM ˘ ` 43 mac001

4Enter the necessary information for your Timer Recording(s).

•Ï Ã – Moves the cursor left/right.

•É – Changes the setting of the current cursor position.

•Press [SETUP] to exit the Timer Record menu.

•Press [ENTER] after filling in all the program information.

•Press [TIMER] to display the Timer Record List.

Edit Timer		Timer Recording using VideoPlus
		system
Media
PR No.	PR-03
Date	02/Jan Sun
Start	13:30
End	14:30
Mode	HQ
Repeat	Once
Delete

Instructions:

Enter-Save Setup-Exit

5Press [ENTER] to save the program. The Timer Record List will appear.

Timer Recording

PR No. Date Start End Mode

PR-03	02/01 13:30 14:30 HQ
----	--/--	--:--	--:--	---
----	--/--	--:--	--:--	---

6 Press [SETUP] to exit the Timer Record List.

7 Timer indicator will light or start blinking. You must power off the HDD/DVD Recorder to start the Timer Recording.

• The Timer indicator lights on the front panel
display when the HDD/DVD Recorder is ready
for the Timer Recording.
• The timer indicator will flash if any of the
following conditions occur;
- Empty or non-recordable disc is found in the
tray when DVD Timer recording starts.
- When you go into Media browser, SETUP,
Timer Recording menu after Timer Recording
setup.
- When you record the TV signal after Timer
Recording setup.
- When you play titles after Timer Recording
setup.
• The HDD/DVD Recorder will automatically	4
power off when the Timer Recording ends.

• There is a short delay when a timer recording

RECORDING

43