Daewoo DHR-8100P user manual Connecting an Amplifier/Receiver, Component Video Connection

DG-M22-12D1P-XA(GB) 2005.12.22 8:4 AM ˘ ` 16 mac001 1200DPI 100LPI

Connections

S-Video Connection

1Connect the S-VIDEO OUT jack on the HDD/DVD Recorder to the S-Video in jack on your TV using an S-Video cable (S).

2Connect the Left and Right AUDIO OUT jacks from the HDD/DVD Recorder to the left/right audio in jacks on your TV using the audio cables.

1Connect the HDD/DVD Recorder’s DIGITAL AUDIO OUT jack (Coaxial or Optical) to the corresponding in jack on your amplifier. Use an optional digital coaxial (or optical) audio cable.

(X)

2You will need to activate the HDD/DVD Recorder’s digital output; see ‘Audio’ Settings on page 25.

Component Video Connection

•If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the HDD/DVD Recorder’s Progressive Scan output for the highest video resolution possible.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

1Connect the COMPONENT VIDEO OUT jacks on the HDD/DVD Recorder to the corresponding in jacks on your TV using a Y Pb Pr cable (C) if the component (Y, Pb, Pr) is available on your TV.

2Connect the Left and Right AUDIO OUT jacks from the HDD/DVD Recorder to the left/right audio in jacks on your TV using the audio cables.

•Be sure to set the HDD/DVD Recorder to Progressive Scan mode by pressing and holding [P.SCAN] for 5 seconds (or changing the ‘Video Output’ in the Setup Menu; see page 24).

•Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

Connecting an Amplifier/Receiver

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic

Connect the Left and Right AUDIO OUT jacks on the HDD/DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

Digital Multi-Channel Sound?

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio/video receiver that supports one or more of the audio formats provided by your HDD/DVD Recorder (MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.

•Due to the DTS Licensing agreement, the digital output will be in DTS digital out when the DTS audio stream is selected.

•If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

•5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with a digital multi- channel decoder.

•To see the audio format of the current DVD on the on-screen display, press [AUDIO].

The HDD/DVD Recorder does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-channel surround, you must connect the HDD/DVD Recorder to a DTS compatible receiver via one of the HDD/DVD Recorder’s digital audio outputs.

Rear of HDD/DVD Recorder

	X	A
OPTICAL	COAXIAL	L	R
DIGITAL INPUT	DIGITAL INPUT	AUDIO INPUT

16

Amplifier (Receiver)