Daewoo DHR-8100P Changing the TV Audio Channel, Changing TV Channels, Elapsed, BIL Audio Signal

DG-M22-12D1P-XA(GB) 2005.12.22 8:4 AM ˘ ` 33 mac001 1200DPI 100LPI

On-Screen Display Overview

Elapsed

Changing the TV Audio Channel

Shows the elapsed playing time, and skips to the desired time.

1Press [DISPLAY] during playback. The on-screen display appears on the TV screen.

2Use [É ] to select the ‘Elapsed’ icon on the on- screen display. Press [ENTER] to search by time. The submenu appears.

3Use [É ] to change the numbers and use [ÏÃ] to move left or right.

4Within 7 seconds, press [ENTER] to confirm the start time. Playback starts from the selected time on the disc.

For the title recorded without DVD navigation information, such as the one from broadcast or line input, ‘Elapsed’ function does not work.

You can change the TV audio using the [AUDIO] button.

Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.

•STEREO Audio Signal Stereo ➝ Mono ➝ Stereo

•BIL Audio Signal

BIL I ➝ BIL II ➝ (BIL Off) ➝ BIL I

•MONO Audio Signal Mono

The current audio channel is displayed on-screen.

•If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

•When an external input is selected, the audio channel can be switched only to Stereo.

SETUP

Changing TV Channels

If no disc is playing, you can change TV channels using the [0-9] or [PR+/–] buttons on the remote control or [PR+/–] buttons on the front panel.

33