Daewoo DHR-8100P Preferences / Audio Settings, Digital Output, Dynamic Range, Virtual Surround

DG-M22-12D1P-XA(GB) 2005.12.22 8:4 AM ˘ ` 25 mac001 1200DPI 100LPI

Setup menu

PREFERENCES / Audio Settings

Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings.

Preferences

Video

Audio

Parental Controls

Auto Settings

Hard Disk

Instructions:

Enter-Confirm Setup-Exit

Move É

Digital Output

1	Use [É/ ] to select ‘Digital Output‘ while the
	‘Audio’ submenu is displayed.
2	Press [ENTER] or [Ã] to go to the second level.
3

Bitstream

Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby Digital or DTS decoder).

Dynamic Range

While watching DVD movies, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest passages). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set ‘Dynamic Range‘ to Low or High for this effect.

Follow the same procedure as ‘Digital Output‘ to set the ‘Dynamic Range’.

Audio				SETUP
	Digital Output	Bitstream
	Dynamic Range	Off
	Virtual Surround	Select	Dynamic
		Off
		Range

Use [É/ ] to select the desired digital output

type.

Instructions:

Off

Low

High

Audio

Digital Output	BitstreamSelect	Digital
Dynamic Range	OffOutput
Virtual Surround	Off
	Off

Bitstream

LPCM

Instructions:

Enter-Confirm Setup-Exit Move É

4Press [ENTER] to confirm your selection.

5Press [SETUP] to exit the menu.

Off

No signal will be output from the Digital Audio Out jacks.

LPCM

Select when connected to a 2 channel digital stereo amplifier. The HDD/DVD Recorder's digital audio signal will be output in the PCM 2ch format when you play a DVD (or HDD) recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.

Enter-Confirm Setup-Exit Move É

Virtual Surround

You can enjoy a simulated 3D effect from two speakers by setting Virtual Surround to On.

Follow the same procedure as ‘Digital Output‘ to set the ‘Virtual Surround’ option.

Audio

Digital Output	Bitstream
Dynamic Range	Off
Virtual Surround	Off
		Select	Virtual
		Surround
		Off
Instructions:		On

Enter-Confirm Setup-Exit Move É

25