HP manual Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter

7 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter

Connecting to a Novell NetWare 3.12 Server

9Open the “Network Properties” window and agree to install “Windows NT Networking”.

10With “Wired to the Network” checked, click on “Next”.

11Click on the option to “Select from list” then on “Have Disk”.

12Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive.

13Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”.

14With “Intel 82557-Based Ethernet PCI Adapter (10/100)” listed in the “Network Adapters:” windows, click on “Next”.

15Accept the applicable network protocols and click on “Next”.

16At the “Network Services:” prompt, accept default settings and click on “Next”.

17Finish the network card installation by clicking on “Next”.

18Designate the path to your NT files and select “Continue”.

19At the “PCI Configuration Notification” window, click on “OK”.

20Click on “OK” for “Intel PROSet” dialog box.

21Click on “Yes” to use DHCP or choose “NO” if you know your IP Address.

22At the “Show Bindings for:” prompt, accept default settings and click on “Next”.

23When “Windows NT is now ready to start the network…” click on “Next”.

24Specify your Computer Name, Workgroup or Domain and click on “Next”.

25After “Network has been installed on this computer” click on “Finish”.