HP 100B-TX manual At the “Network Setup” dialog box, click on “OK”

12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter

Connecting to a Windows NT 4.0 Server

10Click on the “Install Microsoft Windows Network:” option, and click “OK”.

11Click the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.

12Click “OK” to accept the default choice of “Unlisted or Updated Network Adapter”.

13Type the path “A:\WFW” in the “Install Driver” dialog box, and then insert the Intel EtherExpress driver disk into the floppy drive, and click “OK”.

14Select “Intel 82557-Based Ethernet PCI Adapter (10/100)” in the “Unlisted or Updated Network Adapter” dialog box, and click “OK”.

15Make sure that the “Intel 82557-Based Ethernet PCI Adapter (10/100)” is selected in “Network Drivers”.

16Accept the list of Protocols listed below and click on the “CLOSE” button.

17At the “Network Setup” dialog box, click on “OK”.

18Specify your User Name, Workgroup, and Computer Name in “Microsoft Windows Network Names” dialog box, and click on “OK”.

19Finish the network card installation by clicking on “OK” in the “Network Setup” message.

20To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.