HP 100B-TX manual

10Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server

27Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive.

28Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”.

29With “Intel 82557-Based Ethernet PCI Adapter (10/100)” listed in the “Network Adapters:” windows, click on “Next”.

30Accept the applicable network protocols and click on “Next”.

31At the “Network Services:” prompt, accept default settings and click on “Next”.

32Finish the network card installation by clicking on “Next”.

33Designate the path to your NT files and select “Continue”.

34At the “PCI Configuration Notification” window, click on “OK”.

35Click on “OK” for “Intel PROSet” dialog box.

36Click on “Yes” to use DHCP or choose “NO” if you know your IP Address.

37At the “Show Bindings for:” prompt, accept default settings and click on “Next”.

38When “Windows NT is now ready to start the network…” click on “Next”.

39Specify your Computer Name, Workgroup or Domain and click on “Next”.

40After “Network has been installed on this computer” click on “Finish”.