Siemens S223 Configuring Lacp, Packet Route, Activate Lacp function, using the following command

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

•Configuring LACP

•Packet Route

•Operating Mode of Member Port

•Priority of Switch

•Identifying Member Ports within LACP

•BPDU Transmission Rate

•Key value of Member Port

•Priority

•Displaying LACP Configuration

8.2.2.1Configuring LACP

Step 1

Activate LACP function, using the following command.

Command	Mode	Description
lacp aggregator		Enables LACP of designated Aggregator-number:
		AGGREGATIONS: select aggregator ID that should be
AGGREGATIONS
		enabled for LACP (valid value from 0 to 13).
	Bridge
no lacp aggregator		Disables LACP for	designated Aggregator-number,
		select the aggregator	ID that should be disabled for
AGGREGATIONS
		LACP.

Step 2

Configure the physical port that is a member of aggregated port. In order to configure the member port, use the following command.

Command	Mode	Description
		Configures physical port that is member port of aggre-
lacp port PORTS		gator; select the port number(s) that should be enabled
	Bridge	for LACP.
no lacp port PORTS		Deletes member port of Aggregator, select the port
		number(s) that should be disabled for LACP.

8.2.2.2Packet Route

When packets enter to logical port integrating several ports, if there’s no process to de- cide the packet route, it is not possible to use logical port effectively from focusing pack- ets on a particular member port.

If these packets enter to logical port aggregating several ports and there’s no way to de- cide packet route, the packets could be gathered on particular member port so that it is not possible to use logical port effectively.

Therefore the hiD 6615 S223/S323 is configured to decide the way of packet route in or- der to divide on member port effectively when packets are transmitted. It can be selected with Source IP address, destination IP address, source MAC address, destination MAC address and the user could get the information of packets to decided packet route.

A50010-Y3-C150-2-7619 195