Patton electronic 1082/F user manual Configuration, Configuring the Hardware DIP Switches

3.0 CONFIGURATION

The Model 1082/F is equipped with 8 DIP switches that enable configu- ration of the unit for a variety of applications. This section describes switch locations and explains the different configurations.

3.1 CONFIGURING THE HARDWARE DIP SWITCHES

Using a small flat-tip screwdriver, remove the protective cover located on the underside of the Model 1082 (see Figure 4).

511/RDL Normal 511E

Modem

Remote
Normal	ER
Local	TM

Modes	Test	NetLink
	64K/G
703.

iDSL

DSL

	703.G
LOS	Link

NS

Status

Figure 4. Removing the cover to access DIP switches S1 and S2

12