Using Your Phone
Ô NOTE Ô
The Audio Tone feature can not be used while using speaker phone.
ADJUSTING THE RINGER, EARPIECE AND SPEAKER VOLUME
Ringer volume
In standby mode, repeatedly press 
on the handset or base to select ringer volumes. You can select from one of three ringer volumes (Off, Low, or High) for the handset, and one of four ringer volumes (Off, Low, Medium, and High) for the base.
Earpiece and Speaker Volume
You can select earpiece volume from among six volume levels on the handset and the base. For speaker volume, select from among six volume levels on the handset and ten volume levels on the base. Pressing the volume up key or volume down key on the handset or base during a call will change the earpiece or speaker volume. This setting will remain in effect after the telephone call has ended.
If you press the volume up key when the earpiece is at the maximum volume level, an error tone sounds.
The error tone also sounds if you press the volume down key at the lowest volume.
Audio Tones (Base only)
The audio tone features provide three different tone levels (Natural Tone, Hight Tone, or Low Tone). If you have difficulty of hearing a caller adjust audio tone level. The default setting, Natural Tone, is recommended for hearing aid users. Ô
1.While on a call, press the MENU soft key.
2.Press 
to select Audio Tone Setup, and then the OK soft key.
32
