The Integrated Answering Device
Ô NOTES Ô
•Time stamp will not be heard until you have set the time. See “Setting
Day and Time” on page 24.
•The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds.
•If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby.
•During the remote operation,
“Line Remote” appears on the handset.
•If the answering system is recording an incoming message, the recording operation is canceled when you start remote
From the handset
1.While on a call, press MENU/DEL.
2.Press 
to move the pointer to Call Record, and then SELECT/
.
Recording a Call and R appear in the display.
To turn stop recorging, repeat above step again, Stop Recording appears.
REMOTE OPERATION
You can check, play, or delete messages, even record a new greeting message from a remote location (when you are away from home, or from another room using a handset). Additionally, you can turn On or Off your answering system remotely. Ô
Remote access away from home
You can operate your answering system from a remote location using any
1.Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sounds a series of beeps.
2.During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within two seconds (see
“Setting a PIN Code” on page 60).
3.The answering system announces the current time and the number of messages stored in memory. You hear “To play incoming messages, press
4.Enter a command within 15 seconds, each command there after must be
68
