On a Wall Plate or Wall

To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the base.

Drill two holes 315/16 inches apart. Thread a screw into each hole, letting the heads extend about 1/8 inch.

1. Insert the two

tabs at the top

of the narrow end of the

supplied bracket into the base’s lower tab slots, then

press down on

the bracket’s latches and insert them into the upper slots.

2.Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back.

3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.

4.Route the

adapter and modular cords through the base’s grooves.

5.For a wall plate, plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.

Installation

11

Page 11
Image 11
Radio Shack 43-3872 manual On a Wall Plate or Wall