Setting the Record Time | Radio Shack 43-3872 instruction

2.Press to select a Ring Time (Toll Saver, 2 Times, 4 Times, or 6 Times) (default is toll saver).

3.Press SELECT/ (or the OK soft key on the base). You will hear a confirmation tone.

Setting the Record Time

Record Time sets the duration for recording the incoming messages. You have three record time options. The options “one minute” or “four minutes” set the duration for recording the incoming messages. “Announce only” answers the call but prevents the caller from leaving a message.

1.Press MENU/DEL (or the MENU soft key on the base). Select the Answ. Setup menu, and then the Record Time submenu.

2.Press to select Record Time (1 Minute, 4 Minutes, or Announce Only) (default is one minute)

3.Press SELECT/ (or the OK soft key on the base). You will hear a confirmation tone.

Setting the Message Alert On or Off

Message Alert sounds an alert tone when you have an unheard message. If you set the Message Alert on, whenever a new message is received, the soft alert tone will sound every 15 seconds.

1.Press MENU/DEL (or the MENU soft key on the base). Select the Answ. Setup menu, and then the Message Alert submenu.

2.Press to select On or Off (default is off).

The Integrated Answering Device

61

Image 61

Radio Shack 43-3872 manual Setting the Record Time, Setting the Message Alert On or Off

Contents

4GHz Expandable Corded/Cordless Phone Answerer Contents Introduction FCC Statement Information Important Information Surge Protection Important Safety Instructions Important Caller ID Information Read this Before Installation Selecting a Location Installation You must use On a Desk Top On a Wall Plate or Wall Using AC Power CONNECTING/CHARGING the Battery Pack Recharging the Battery Pack Using a Headset Installing the BeltclipTo attach the beltclip To remove the beltclip Display and Icons Example of the standby mode display Handset 570# Soft KEY Functions Base Using the Interface Setting Menu Options Using DirectLink Mode Handset only DirectLink ModeUsing Room/Monitor Room/Baby Monitor Selecting a Ringer Tone Handset Setup/Base Setup Distinctive Ringer Setup Selecting a Language Setting the Anykey Answer Handset only Setting the Key Touch Tone Setting Day and Time Global SetupSetting Cidcw Caller ID on Call Waiting Setting the Dial Mode Setting the Area Code De-register the Handset System Reset Handset only Handset Registration Place handset on main base Power Failure Operation Using Your PhoneMaking a Call From the handset From the Handset Speakerphone Receiving a CallFrom the base Hanging UP Switching to Speakerphone During a CallCall Waiting Redialing Placing a Call on Hold Earpiece and Speaker Volume Ringer volumeAdjusting the RINGER, Earpiece and Speaker Volume Audio Tones Base only Temporarily Muting the Ringer Do Not Disturb DNDMuting the Ringer Mute Microphone Tone Dialing SWITCH-OVER Booster Handset Only Traveling OUT Range Conferencing Privacy ModeJoining a Conference Call Speed Dialing Find HandsetFrom a second handset Phonebook Phonebook If you make a mistake while entering a name Store/Edit No. appears Storing a Redial Record Storing Caller ID Messages in the Phonebook Viewing the Phonebook Deleting a Redial Record Making Calls Using the Phonebook From Standby Mode Deleting ALL Phonebook Locations Base only Copying Phonebook Locations From the handset From the base Testing Stored Emergency Number Incomplete Data Caller ID and Cidcw Caller ID on Call Waiting Call Waiting Deluxe Features Viewing the Caller ID List Deleting ALL Caller ID NAME/NUMBERS Deleting Information from the Caller ID List From Talk mode From Standby ModeCalling a Party from the Caller ID List Four Multi-Handset Expandability Expanding Your PhoneRegister the Handset to the Base DirectLink call Using the Directlink Mode Intercom INTERCOM/CALL Transfer FeatureFOUR-WAY Conferencing Making an Intercom From a handset Answering an Intercom Call Transfer Feature To answer a page from a handset Answering a Call Transfer To answer a page from the base Accepting the call transfer Integrated Answering Device Features Record a Personal Outgoing Message Base Only Answering System SetupSelecting Your Greeting Base only Setting the Ring Time Setting a PIN Code Setting the Message Alert On or Off Setting the Record Time Setting the Call Screen Setting the Language of your Answering SystemTurning the message alert tone off by pressing any key Turning the message alert tone off from a remote location Turning the Answering System ON/OFF Using Your Answering System Playing your messages New Message LEDRepeating a message Skipping a message Deleting a message Recording a conversation Voice memo Remote Operation Remote access away from home Function Remote Key Function Remote access with the handsetAnsweringMachine operation appears on the base Integrated Answering Device Symptom Suggestion Troubleshooting Keep the handset away from microwave ovens Care Service and Repair Memo RadioShack Corporation