4.On the handset, press and hold #/> for two seconds. To cancel registration, press the CANCEL soft key on the base.
5.While the handset is registering,
Handset Registering will appear in the Handset LCD. When
Registration Complete is displayed, the handset has been registered to the base. If
Registration Failed appears, please try these steps again.
USING THE DIRECTLINK MODE
To use this feature, you must enter the two handsets into the DirectLink mode first. Ô
To enter the DirectLink mode, see “Using DirectLink Mode (Handset only)” on page 19.
DirectLink call
1.When the phone is in the DirectLink standby mode, press the TALK/FLASH.
2.Select the handset to which you wish to DirectLink with by pressing the number keys
3.On the receiving handset, press TALK/FLASH, or if Anykey Answer is on, press any number key, 
/TONE/< or #/>.
4.When you finish your conversation, press END on either handset. Return the handset to the cradle, or press
MENU/DEL and then SELECT/
(cancelling DirectLink mode).
Ô NOTE Ô
Handsets can be in Direct Link mode while other handsets are in use. To use other handsets, register them to the original base.
Expanding Your Phone
53
