Motorola C200 manual Using Your Phone, Turning on the Phone, Making a Phone Call

C200.book Page 22 Wednesday, August 27, 2003 4:50 PM

Using Your Phone

Turning on the Phone

Press and hold (to turn your phone on.

1Enter your PIN. If you type a wrong number while entering your PIN, delete the wrong number by pressing &('(/). When done, press $(2.) or )to confirm.

Tip: PIN (Personal Identification Number) is a password provided by your network operator. With your PIN, you can use your SIM card and access the services offered by your operator.

Note: If you enter a wrong PIN three times in a row, your SIM card will be blocked. To unblock the SIM card, you need to enter the PUK (Personal Unblocking Key) of the card. Please call the operator, and ask for PUK.

Making a Phone Call

1Once your PIN is accepted, the phone will start searching for your designated network automatically, as w indicates. This may take a few seconds. When receiving network signals successfully, the phone beeps twice with its LCD display showing the network you connect to and then goes into idle mode.

2Now you can dial a desired number using the keys on the keypad. Press &('(/) to delete wrong digits. Press ) to send your call.

Note: When network service is not available, no signal level will be displayed on the screen.

Note: When connected to a network you do not have access rights to, you will only be able to make emergency calls. The signal strength for this network will still be displayed on the screen.

22 - Using Your Phone