Motorola C200 manual Set Time & Date, Key Lock, Clock, Auto KeyLock, Lock now

C200.book Page 82 Wednesday, August 27, 2003 4:50 PM

Clock (8-1-4)

Display the handset’s default animation, which is a clock screensaver. To display the current time, you must first adjust the time setting. See “Set Time & Date (8-2)” below. Other screensaver scenarios are the same as those described in “Animation 1 (8-1-2)” above.

Set Time & Date (8-2)

Sets current date and time to be displayed on the idle screen.To set the date, use number keys to enter year, month, and day, then press $(2.) or )to confirm. To set current time (24 hr format), use Ato enter the hour, then press 0and enter the minute the same way. You can also use number keys to type the exact time directly. If you want to clear digits, press &('(/).

Key Lock (8-3)

You can activate the keypad lock to prevent unintentional key-in actions, say, when you put your phone in a bag. In idle, you can also press and hold #to activate the lock. When the lock is enabled, l will appear at the bottom of the idle mode screen. You still can answer phone calls by pressing ). To unlock, press

&(8QORFN) or ), then press *.

Auto KeyLock (8-3-1)

The key lock will be activated approximately 30 seconds after you set this mode on.

Lock now (8-3-2)

Activate the key lock immediately.

Off (8-3-3)

Disable the function.

82 - Menus